Western PRO-FLO 2 Bedienungshandbuch PDF herunterladen (Seite 11)

March 1999 8 Form No. 13721

MOUNTING THE SPREADER

4. Position tabs on the hopper assembly over the top

of the mount assembly, and lower the assembly.

5. Insert pin on each side and secure with hairpin

cotter pin.

6. Connect spreader wiring harness to the vehicle

wiring harness.

NOTE: Grease all electrical connections with

dielectric grease.

CAUTION

Both hold-down pins must be in place and

secured with hairpin cotter pins. The hopper

assembly may become unstable if the pins are

not properly secure while the vehicle is in

motion.

7. Verify vehicle stoplights and spreader center high

mounted stoplight are working properly.

3. Lift the hopper assembly using a hoist or two

people, and tip slightly forward.

Spreader Wiring Harness

Vehicle Wiring Harness

Hairpin Cotter Pin

Hold-down Pin

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Keine Kommentare

Western PRO-FLO 2 Bedienungshandbuch Seite 11